531X191RTBAFG1 继电器端子板 GE 提供了许多电路板功能

【产品详情】

531X191RTBAFG1 板是继电器端子板。通用电气为其 531X 板系列开发了这款板。作为此更换板系列的成员，该卡可以安装到 GE 系列的许多驱动器中。这张卡具有双重用途。用户可以通过卡的端子板访问触点和线圈。 该卡还提供七个继电器来控制外部电路。

该卡提供了许多电路板功能。531X191RTBAFG1 包含一个 115 VAC 线圈，具有 50/60 Hz 的电流。保持电流产生的电流为 9 mA，而板载触点的电流为 0.7 A DC 或 105 VDC。该卡还可以提供RTB点和继电器触点的表格。当继电器通电时，集成的 LED 指示灯将在视觉上提醒用户此状态。馈送到电路板的外部电路也可以使用此板进行控制。

该板包括一组应满足的安装参数。遵循这些要求将确保驱动器本身正常运行。安装板卡时，请确保只允许合格的人员处理或安装卡。有关连接 531X191RTBAFG1 的说明，请参阅电路板手册和数据表。该板的技术支持最初由系列制造商通用电气提供。

531X191RTBAFG1 继电器端子板 GE 提供了许多电路板功能

【英文介绍】

The 531X191RTBAFG1 board is the relay terminal board. Ge developed the board for its 531X board family. As a member of this replacement board family, the card can be installed into many drives in the GE family. This card has a dual purpose. The user can access the contacts and coils through the terminal board of the card. The card also offers seven relays to control external circuits.

The card offers a number of board functions. The 531X191RTBAFG1 contains a 115 VAC coil with a 50/60 Hz current. The holding current produces A current of 9 mA, while the on-board contact has a current of 0.7 A DC or 105 VDC. The card can also provide a table of RTB points and relay contacts. When the relay is powered on, an integrated LED indicator will visually alert the user to this status. External circuits fed to the board can also be controlled using this board.

The board includes a set of installation parameters that should be met. Following these requirements will ensure that the drive itself is functioning properly. When installing a card, ensure that only qualified personnel are allowed to handle or install the card. Refer to the board manual and data sheet for instructions on connecting the 531X191RTBAFG1. Technical support for the board was initially provided by series manufacturer General Electric.

531X191RTBAFG1 继电器端子板 GE 提供了许多电路板功能

【其他型号推荐】