531X187VCTADG1 电气电压电流传感器卡
【产品详情】
通用电气为531X系列板开发了187X1VCTADG531电压电流传感器卡。安装时，该传感器卡用于将接收到的电压信号转换为隔离电流或隔离电压信号。最初，只有驱动器产品操作系列 DC-300、AC-300 和 AC-500 驱动器可以接受此卡。现在，大多数使用驱动器产品操作技术的驱动器都可以接受此卡。安装位置因安装的驱动器而异。
当发送到该板时，电压与转换点一起提供。两个隔离输出，分别称为ATB和BTB，位于531X187VCTADG1板上。两个通道的输出由电路板上的 24 VDC 电源供电。特定负载的个性化要求可以通过电路板上的可配置点来满足。在板载上，jumpers允许用户改变信号的滤波时间常数。开关还允许进行调整以改变产生完整输出所需的基线输入电平。
应满足与电路板相关的安装参数，以确保整体驱动器运行。接受过安装板培训的人员应是唯一允许操作 531X187VCTADG1 板的用户。正确的接线对于确保电路板功能正常至关重要。请查看设备数据表和手册中的完整接线和安装说明。531X 系列板的成员最初由制造商通用电气提供技术支持。
531X187VCTADG1 电气电压电流传感器卡
【英文介绍】
Ge developed the 187X1VCTADG531 voltage and current sensor card for the 531X series board. When installed, the sensor card is used to convert the received voltage signal into an isolated current or isolated voltage signal. Initially, only drive product operating family DC-300, AC-300, and AC-500 drives could accept this card. Now, most drives that use drive product operation technology can accept this card. The installation location varies depending on the drive being installed.
When sent to the board, the voltage is provided along with the transfer point. The two isolated outputs, called ATB and BTB, are located on the 531X187VCTADG1 board. The output of both channels is powered by a 24 VDC supply on the board. Individual requirements for specific loads can be met through configurable points on the board. On board, jumpers allows the user to change the filtering time constant of the signal. The switch also allows adjustments to change the baseline input level needed to produce the full output.
The installation parameters associated with the board should be met to ensure overall driver operation. Personnel trained to install the board should be the only users allowed to operate the 531X187VCTADG1 board. Proper wiring is essential to ensure that the board functions properly. Check the device data sheet and manual for complete wiring and installation instructions. The 531X series board members were initially supported by manufacturer General Electric.
531X187VCTADG1 电气电压电流传感器卡
【其他型号推荐】
| WOODWARD | 9907-147 | WOODWARD | 5453-279 | ABB | UFC921A101 3BHE024855R0101 |
| BENTLY | 3500/22-01-01-00 | WOODWARD | 5466-318 | CCC | IOC-555-D |
| TRICON | 4000094-310 | WOODWARD | 5466-425 | EMERSON | 9199-00002 A6120 |
| TRICON | 4000093-310 | WOODWARD | 5466-258 | ICS TRIPLEX | T9110 |
| ABB | IC695CPU315 | WOODWARD | 5501-470 | ABB | UFC921A101 3BHE024855R0101 |
| WOODWARD | 2301E 8273-1011 | WOODWARD | 5501-471 | AMAT | 0100-71224 |
| BENTLY | 3500/77M | AMAT | 0100-71311 | ||
| TRICONEX | 8120E | COEN | DSF-2000-MB-UV | AMAT | 0100-71313 |
| ABB | SYN5201A-Z,V277 3BHB006714R0277 | FOXBORO | FCP270 | AMAT | 0100-76124 |
| KONGSBERG | RMP201-8 | EMERSON | SLS1508 | ICS TRIPLEX | T8403 |
| VIBRO-METER | 200-510-076-114 200-510-111-034 VM600 MPC4 | EMERSON | SLS1508 | ICS TRIPLEX | T8461 |
| ICS TRIPL EX | T8431 | EMERSON | KJ2221X1-BA1 | ICS TRIPLEX | T8311 |
| SCANL AB | INTELLISCANDE I14-532NM SCANL AB | GE | IC698RMX016-ED | ICS TRIPLEX | T8431 |
| KONGSBERG | RMP201-8 | GE | IC698CRE030-DE | BENTLY | 1900/65A-00-00-02-00-01 |
| ABB | MB5103BSE002540R1 | GE | IC687BEM731-AB | Vibro-meter | 200-510-076-114 200-510-111-034 VM600 MPC4 |
| ABB | DAPI100 3AST000929R109 | GE | IC698CHS009A | EPRO | PR6423/003-010 |
| ABB | CI522A 3BSE01 8283R1 | GE | IC698PSD300C | ABB | YPC104B YT204001-BT |
