531X174RCCADG1 通用电气带状连接器板

【产品详情】

531X174RCCADG1 是通用电气带状连接器板，属于其 531X 系列。GE不再销售该板和531X系列，现在可能很难找到。

531X174RCCADG1是一个非常小的方形PCB，重量仅为0.22磅左右。它有一个具有四十二个金属插脚的单公连接器。带状连接器直接插入其中。电路板顶部有一个白色塑料夹，可以将带状连接器固定到位。电路板底部边缘共有三十二条金线（金手指），它们是导电片，充当背板并帮助连接到次级PCB。在卡片的顶部边缘，每个角有两个工厂钻孔。在这两个工厂钻孔之间是另一个孔，该孔具有螺钉，螺母和塑料环。该板上还有 <> 条多一点的电气通路，允许电流在板上的组件之间传输。

有关 531X174RCCADG1 及其在 531X 系统中安装的更多信息，请参阅通用电气提供的数据表。由于这是PCB，因此建议在处理此板和该系统中的任何其他组件时遵循适当的防静电程序。只有经过培训的专业人员才能尝试安装此板，以防止对系统组件造成任何类型的损坏或人身伤害。

531X174RCCADG1 通用电气带状连接器板

【英文介绍】

The 531X174RCCADG1 is a General Electric strip connector board belonging to its 531X series. 

The 531X174RCCADG1 is a very small square PCB that weighs only about 0.22 pounds. It has a single male connector with forty-two metal pins. The ribbon connector plugs directly into it. There is a white plastic clip on top of the board that holds the ribbon connector in place. The bottom edge of the board has a total of thirty-two gold wires (gold fingers), which are conductive sheets that act as backplanes and help connect to the secondary PCB. On the top edge of the card, there are two factory holes in each corner. Between these two factory holes is another hole, which has a screw, nut and plastic ring. The board also has <> a little more electrical path that allows the current to be transferred between the components on the board.

For more information about the 531X174RCCADG1 and its installation in the 531X system, see the data sheet provided by GE. Since this is a PCB, it is recommended to follow proper anti-static procedures when handling this board and any other components in this system. Only trained professionals should attempt to install this board to prevent any type of damage or personal injury to the system components.

531X174RCCADG1 通用电气带状连接器板

【其他型号推荐】