531X170TBSADG1 GE制造的电路板组件  DC-300 驱动器

【产品详情】

531X170TBSADG1是GE制造的电路板组件，用于GE的通用驱动系统。其中一个系统是 DC-300 驱动器。您的用户指南或手册应帮助您确定PCB是否与您的驱动系统兼容。

531X170TBSADG1 可用作 TB 选件卡。该板的尺寸为 2.75 英寸 x 11 英寸。它设计有工厂制造的钻孔，旨在提供安装选项。每个角落都有一个安装孔。另一个位于电路板的中心，两个位于电路板边缘。

531X170TBSADG1 有两个端子条。 一条带有 37 个螺钉位置，另一条有 2 个螺钉位置。电路板上放置的其他组件包括五个连接器（三个针座连接器、一个公垂直引脚电缆连接器和一个 24 针 DC 母连接器）、一个电感线圈、一个继电器、两个开关组件、一个卡入式连接器、一个聚酯乙烯基电容器、一个跳线开关和一个二极管。 每个开关组件都有四个开关。继电器组件标记为“DS2E-M-DC<>V”。这是一个 <> 型 C 继电器。它具有环氧树脂密封件，适用于恶劣的环境。它具有镀金双触点，高度稳定，可确保长期稳定的接触电阻。如果需要更多信息，请参阅引用此部件号的GE手册或数据表。

531X170TBSADG1 GE制造的电路板组件  DC-300 驱动器

【英文介绍】

The 531X170TBSADG1 is a board component manufactured by GE for use in GE's universal drive systems. One of these systems is the DC-300 drive. Your user guide or manual should help you determine if the PCB is compatible with your drive system.

The 531X170TBSADG1 can be used as a TB option card. The board measures 2.75 inches x 11 inches. It is designed with factory-made boreholes designed to provide installation options. Each corner has a mounting hole. Another is located in the center of the board, and two are located on the edge of the board.

The 531X170TBSADG1 has two terminal bars. One has 37 screw positions and the other has 2 screw positions. Other components placed on the board include five connectors (three pin base connectors, a male vertical pin cable connector, and a 24-pin DC female connector), an inductor coil, a relay, two switch assemblies, a snap-in connector, a polyester vinyl capacitor, a jumper switch, and a diode. Each switch assembly has four switches. The relay assembly is labeled "DS2E-M-DC<>V". This is a <> type C relay. It has an epoxy seal and is suitable for harsh environments. It features gold-plated double contacts and is highly stable, ensuring long-term stable contact resistance. For more information, refer to the GE manual or data sheet that references this part number.

531X170TBSADG1 GE制造的电路板组件  DC-300 驱动器

【其他型号推荐】