531X170TBSABG1 印刷电路板组件 通用驱动系统

【产品详情】

531X170TBSABG1是GE印刷电路板组件。 该板组件不是设计为特定的驱动组件，而是设计用于GE制造的许多通用驱动系统。可以通过查看制造商提供的用户指南和手册来确定与驱动器的兼容性。

531X170TBSABG1 可用作 TB 选件卡。这是一块又长又窄的板。它的尺寸为 2.75 英寸 x 11 英寸，工厂在多个地方钻孔，包括每个角落，一次靠近电路板中心，两次沿一个长边。 电路板的中心由一个长端子条和另一个较短的端子条填充。这些组件中的第一个有 <> 个螺钉连接。第二个端子条有 <> 个螺钉连接。这些连接中的每一个都单独编号并在电路板表面上标记。

531X170TBSABG1 还有其他几个电路板组件。这包括一个整流二极管、一个单跳线开关、一个卡入式连接器、一个电感线圈和一个聚酯乙烯基电容器 （200V 10+/- 10% 104x122AA208）。该板有三个针座连接器。一个是二十四针连接器，一个是十六针连接器，最后一个是九针连接器。它有一个垂直针公头电缆连接器和一个母头 DC-37 连接器。 该板有两个开关组件，每个开关有四个拨动。切换开关可以设置为“DCE”或“DTF”。最后一个电路板元件是DS2E-M-DC24V继电器。该继电器适用于恶劣环境，可与自动焊接和自动清洗系统一起使用。它具有镀金双触点，可确保高可靠性和极化磁路。

531X170TBSABG1 印刷电路板组件 通用驱动系统

【英文介绍】

The 531X170TBSABG1 is a GE printed circuit board component. The board component is not designed as a specific drive component, but is designed to be used in many general-purpose drive systems manufactured by GE. Compatibility with the drive can be determined by reviewing the user guide and manual provided by the manufacturer.

The 531X170TBSABG1 can be used as a TB option card. It's a long, narrow board. It measures 2.75 inches x 11 inches, and the factory drilled holes in multiple places, including each corner, once near the center of the board and twice along one long side. The center of the board is filled with one long terminal strip and another shorter terminal strip. The first of these components has a <> screw connection. The second terminal strip is connected with <> screws. Each of these connections is individually numbered and marked on the board surface.

The 531X170TBSABG1 has several other board components. This includes a rectifier diode, a single jumper switch, a snap-in connector, an inductor coil, and a polyester vinyl capacitor (200V 10+/- 10% 104x122AA208). The board has three pin base connectors. One is a 24-pin connector, one is a 16-pin connector, and the last one is a nine-pin connector. It has a vertical pin male cable connector and a female DC-37 connector. The board has two switch assemblies, each with four toggles. The switch can be set to DCE or DTF. The final circuit board element is the DS2E-M-DC24V relay. The relay is suitable for harsh environments and can be used with automatic welding and automatic cleaning systems. It features gold-plated double contacts to ensure high reliability and polarized magnetic circuits.

531X170TBSABG1 印刷电路板组件 通用驱动系统

【其他型号推荐】