531X159MPEAMG1 电机保护设备板 电机保护设备板

【产品详情】

531X159MPEAMG1--电机保护设备板

531X159MPEAMG1 是通用电气创建的电路板组件，用于其通用驱动器，如 AC-300 或 DC-300。并非所有 531x 系列中的 PCB 都与所有驱动器兼容;请查阅您的手册。

531X159MPEAMG1用作电机保护设备板。该板由大量电阻器、电容器和二极管组成。电阻器通常由金属膜制成，但电路板上使用一些碳复合电阻器。电容器使用各种材料，包括聚酯乙烯基、电解材料和陶瓷。该板具有三个电阻网络阵列和十个电位计。

531X159MPEAMG1 表面有三个三种不同设计的变压器。其中一个变压器使用表面布线连接到端子引脚。有两个继电器，都位于电路板的同一侧。电路板表面有二十多个跳线开关、两个保险丝、两个散热器、几个晶体管和十几个集成电路。

531X159MPEAMG1 表面的其他组件包括一个开关组件、六个红色 LED 指示灯、一个绿色 LED 指示灯、卡入式连接器、针座连接器和四个端子条。端子条都位于电路板的同一侧。有关更多信息，请参阅电路板的数据手册。

531X159MPEAMG1 电机保护设备板 电机保护设备板

【英文介绍】

531X159MPEAMG1- Motor protection equipment board

The 531X159MPEAMG1 is a circuit board component created by General Electric for use in its general-purpose drivers such as the AC-300 or DC-300. Not all PCBS in the 531x series are compatible with all drives; Please refer to your manual.

531X159MPEAMG1 is used as a motor protection device board. The board consists of a large number of resistors, capacitors and diodes. Resistors are usually made of metal film, but some carbon composite resistors are used on circuit boards. Capacitors use a variety of materials, including polyester vinyl, electrolytic materials and ceramics. The board has three resistor network arrays and ten potentiometers.

The 531X159MPEAMG1 surface has three transformers of three different designs. One of the transformers is connected to the terminal pin using surface wiring. There are two relays, both located on the same side of the board. On the surface of the circuit board are more than twenty jumper switches, two fuses, two radiators, several transistors and a dozen integrated circuits.

Additional components on the 531X159MPEAMG1 surface include a switch assembly, six red LED indicators, a green LED indicator, snap-in connectors, pin holder connectors, and four terminal strips. The terminals are located on the same side of the board. Refer to the board's data manual for more information.

531X159MPEAMG1 电机保护设备板 电机保护设备板

【其他型号推荐】