531X140CCHANM2  表面预装了八个支座 这些位于电路板表面

【产品详情】

531X140CCHANM2是GE设计的电源板，作为AC-500驱动系统的一部分。该板重约一磅，并在每个角落进行工厂钻孔，以允许安装选项。

531X140CCHANM2 表面预装了八个支座。这些位于电路板表面，允许用户将可选的辅助板安装到电源控制板上。辅助板安装在支座中，并通过螺钉安装固定到位。板与板之间的通信是通过连接到主板表面垂直引脚电缆连接器的带状电缆实现的。531X140CCHANM2 表面有多种垂直连接器

531X140CCHANM2 表面设计有一个按钮开关组件。它还具有晶体管、电阻网络阵列和电位计，以及多个跳线开关。跳线用于更改电路板的马力设置，以满足个人用户的需求。这些设置可以在 GEK-85766 等出版物中找到。还有多个集成电路、电容器、电阻器和表面布线。该板标有 VA-4 和 FR 00/0 等代码。它还带有备用的 F31x 板号。

531X140CCHANM2  表面预装了八个支座 这些位于电路板表面

【英文介绍】

The 531X140CCHANM2 is a power board designed by GE as part of the AC-500 drive system. The board weighs about a pound and is factory-drilled at each corner to allow for installation options. 

The 531X140CCHANM2 surface is pre-installed with eight supports. These are located on the board surface and allow the user to attach an optional auxiliary board to the power control board. The auxiliary plate is installed in the support and secured in place by screw mounting. Board-to-board communication is achieved by a ribbon cable connected to a vertical pin cable connector on the surface of the motherboard. The 531X140CCHANM2 surface has a variety of vertical connectors

The 531X140CCHANM2 surface design has a push-button switch assembly. It also has transistors, resistor network arrays and potentiometers, as well as multiple jumper switches. Jumpers are used to change the horsepower Settings of the board to meet the needs of individual users. These Settings can be found in publications such as GEK-85766. There are also multiple integrated circuits, capacitors, resistors, and surface wiring. The board is marked with codes such as VA-4 and FR 00/0. It also comes with a spare F31x board number.

531X140CCHANM2  表面预装了八个支座 这些位于电路板表面

【其他型号推荐】