531X139APMALM7 印刷电路板组件  ISO 微型应用卡

【产品详情】

531X139APMALM7是GE制造的印刷电路板组件，适用于各种系统，包括DC-300或AC-300驱动器等几种通用驱动系统。这些驱动器最初设计用于工业应用。

531X139APMALM7 可用作 ISO 微型应用卡。 此卡在 531x 系列中有多个版本。这是一个大板，组件密集。它在电路板表面上印有几个代码，包括辅助 F31X 标识号。

531X139APMALM7 有八个电位计。其中四个放置在电路板的左下角，并标记为AN1 SCL，AN2，P1和P2。该板只有一个 LED 指示灯。该指示器为红色，位于右下象限。使用超过三十个电阻网络阵列，以及传统的金属膜电阻器。大多数电容器由陶瓷材料制成。

531X139APMALM7 通过其三个端子条（一个三位和两个六位）、四个针座连接器和两个垂直针公头电缆连接器与其他电路板通信。 板上的其他组件包括超过 45 个集成电路、四个继电器、跳线开关、TP 测试点和二极管。该板在多个位置钻孔。

531X139APMALM7 印刷电路板组件  ISO 微型应用卡

【英文介绍】

The 531X139APMALM7 is a printed circuit board assembly manufactured by GE for use in a variety of systems, including several general-purpose drive systems such as DC-300 or AC-300 drivers. These drives were originally designed for industrial applications.

The 531X139APMALM7 can be used as an ISO micro application card. There are several versions of this card in the 531x series. This is a large board with dense components. It has several codes printed on the board surface, including the auxiliary F31X identification number.

The 531X139APMALM7 has eight potentiometers. Four of them are placed in the bottom left corner of the board and are labeled AN1 SCL, AN2, P1 and P2. The board has only one LED indicator. The indicator is red and located in the lower right quadrant. Uses an array of more than thirty resistor networks, as well as conventional metal film resistors. Most capacitors are made of ceramic materials.

The 531X139APMALM7 communicates with other boards through its three terminal bars (one three-bit and two six-bit), four pin holder connectors, and two vertical pin male cable connectors. Other components on the board include more than 45 integrated circuits, four relays, jumper switches, TP test points, and diodes. The plate is drilled in multiple locations.

531X139APMALM7 印刷电路板组件  ISO 微型应用卡

【其他型号推荐】