531X138RDGBBG1 机架驱动器插头板

【产品详情】

531X138RDGBBG1--机架驱动器插头板

531X138RDGBBG1是通用电气制造的电路板组件，用于安装其通用驱动系统。 其中许多系统现在被认为已经过时。然而，它们的原始设计使它们成为能够执行许多工业任务的动态、灵活的系统。

531X138RDGBBG1 用作机架驱动器插头卡。 它是一个只有几个组件的大型矩形卡。该板设计为允许通过单个印刷电路板在机架系统内进行多个连接。

531X138RDGBBG1 标有多个代码，包括其备用板号 VA-4 和 FR00/0。该板设计有三个 24 针接头连接器，沿电路板左边缘一个彼此重叠放置。沿着电路板的右边缘，有一个 9 针连接器、一个 14 针连接器和一个 16 针连接器。下面是两行附加连接器。它们平行于底部边缘。这些连接器上的每个引脚都单独编号和标记。

531X138RDGBBG1 的表面除了前面描述的接头连接器外，没有其他组件。 该板经过钻孔，可安装在六个位置（角落和边缘）。有关车载操作的更多信息，或有关安装或维护的信息，可通过GE出版物（如系列用户指南和驱动器手册）找到。GE负责该板和其他531x系列板的所有技术支持。

【英文介绍】

531X138RDGBBG1-- Rack driver plug board

The 531X138RDGBBG1 is a circuit board assembly manufactured by General Electric to install its universal drive system. Many of these systems are now considered obsolete. However, their original design makes them dynamic, flexible systems capable of performing many industrial tasks.

The 531X138RDGBBG1 is used as a rack driver plug card. It is a large rectangular card with only a few components. The board is designed to allow multiple connections within the rack system via a single printed circuit board.

The 531X138RDGBBG1 is marked with multiple codes, including its alternate board numbers VA-4 and FR00/0. The board design has three 24-pin connector connectors placed one on top of the other along the left edge of the board. Along the right edge of the board, there is a 9-pin connector, a 14-pin connector, and a 16-pin connector. Below are two lines of additional connectors. They're parallel to the bottom edge. Each pin on these connectors is individually numbered and labeled.

The surface of the 531X138RDGBBG1 has no components other than the splitter connectors described earlier. The plate is drilled and can be installed in six positions (corners and edges). More information about on-board operation, or about installation or maintenance, can be found through GE publications such as Series user guides and drive manuals. GE is responsible for all technical support for this board and other 531x series boards.

【其他型号推荐】