531X135PRGBBG1 直流驱动器 编程卡

【产品详情】

531X135PRGBBG1 是通用电气印刷电路板，用作其各种直流驱动器（包括 DC-300 驱动器）的一部分。 虽然 OEM 目前不支持其中许多驱动器。库存情况显示在每个零件页面上，但有关最新信息，请随时联系我们的员工。

531X135PRGBBG1 用作编程卡。此卡标有两个识别号：此 531x 号码和辅助 F31x ID 号。该板包括其他代码，如 VA-4、Froo/o 和 003/0。

531X135PRGBBG1 设计用于固定在带有 531 个按键和一个 135 位显示器的键盘显示屏下方。 此顶部显示器的面板包括四个螺钉，这些螺钉牢固地连接到位于 1X<>PRGBBG<> 板上的四个螺钉安装座中。该装置还具有将其固定到位的边缘夹。关联的显示屏包括一个数字键盘（<> 到 <>），带有停止按钮、清除/模式按钮和输入按钮。清除/模式按钮也可用作重置键。

电路板组件包括电阻网络阵列、跳线开关、直角电缆连接器以及各种电阻器和电容器。

531X135PRGBBG1 直流驱动器 编程卡

【英文介绍】

The 531X135PRGBBG1 is a General Electric printed circuit board used as part of its various DC drivers, including DC-300 drivers. While many of these drives are not currently supported by Oems

531X135PRGBBG1 used as a programming card. The card is marked with two identification numbers: the 531x number and the auxiliary F31x ID number. The board includes other codes such as VA-4, Froo/o, and 003/0.

The 531X135PRGBBG1 is designed to be anchored underneath a keyboard display with 531 keys and a 135-bit display. The panel of this top display comprises four screws securely attached to four screw mounting seats located on the 1X<>PRGBBG<> board. The device also has edge clamps that hold it in place. The associated display includes a numeric keypad (<> to <>) with a stop button, a clear/mode button, and an input button. The Clear/Mode button can also be used as a reset button.

Board components include resistor network arrays, jumper switches, right Angle cable connectors, and a variety of resistors and capacitors.

531X135PRGBBG1 直流驱动器 编程卡

【其他型号推荐】