531X133PRUANG1 过程接口板 用于放大、滤波和转换输入信号

【产品详情】

531X133PRUANG1是GE制造的过程接口板，用于其多个通用驱动系统。请参阅与您的驱动系统相关的手册或用户指南以确定兼容性。

531X133PRUANG1 用于放大、滤波和转换输入信号，以便连接的控制系统能够正确使用它们。这是该系列中该板的几个版本之一。 它标有电路板编号和代码，如 F31x133PRUALG1、002/01、003/01 和 006/01。代码位于电路板的正面和背面。

531X133PRUANG1 由一个 16 针针座连接器、两个带垂直针的电缆连接器和一个端子条等组件组成。端子条有三个螺钉连接，并标有 TACH （-） 和 TACH （+.）该板还具有 <> 个跳线开关和多个 TP 测试点。它有一个标记为“TACH 系列”的开关组件。该组件有七个独立的拨动开关，可以设置为打开或关闭。

531X133PRUANG1 由各种电阻器、电容器和二极管组成。板上的大多数电容器由陶瓷材料制成，但有几个由聚酯乙烯基制成，一个是铝电解组件。该板有一百个金属膜电阻器，大多数垂直安装在电路板表面。但是，其中三个电阻器水平安装或连接到其他电路板组件的表面接线。该板还利用了七个电位计和五个电阻网络阵列。有关 531X133PRUANG1 的更多信息，请访问 GE 用户指南和手册。

531X133PRUANG1 过程接口板 用于放大、滤波和转换输入信号

【英文介绍】

The 531X133PRUANG1 is a process interface board manufactured by GE for use in several of its general-purpose drive systems. Refer to the manual or user guide associated with your drive system to determine compatibility.

The 531X133PRUANG1 is used to amplify, filter and convert input signals so that they can be used correctly by the connected control system. This is one of several versions of the board in the series. It is labeled with board numbers and codes such as F31x133PRUALG1, 002/01, 003/01, and 006/01. The code is located on the front and back of the board.

The 531X133PRUANG1 consists of a 16-pin base connector, two cable connectors with vertical pins, and a terminal strip. The terminal strip has three screw connections and is marked with TACH (-) and TACH (+.) The board also has <> a jumper switch and multiple TP test points. It has a switch assembly labeled "TACH Series". The component has seven independent toggle switches that can be set to turn on or off.

The 531X133PRUANG1 consists of various resistors, capacitors and diodes. Most of the capacitors on the board are made of ceramic materials, but several are made of polyester vinyl and one is an aluminum electrolytic component. The board has a hundred metal film resistors, most of which are vertically mounted on the board surface. However, three of the resistors are mounted horizontally or connected to surface wiring of other board components. The board also utilizes seven potentiometers and five resistor network arrays. For more information about the 531X133PRUANG1, please visit the GE User Guide and manual.

531X133PRUANG1 过程接口板 用于放大、滤波和转换输入信号

【其他型号推荐】