531X133PRUAMG1 过程接口板 具有允许连接的组件

【产品详情】

531X133PRUAMG1是GE制造的PCB板组件。该PCB设计用于GE的几个通用驱动系统。请参阅特定系统的用户指南或手册以确定兼容性。

531X133PRUAMG1 用作过程接口板。接口组件通常用于放大、隔离、过滤其输入信号并将其转换为适合其连接的控制系统的输出信号。 PRUAM 板只是该系列中几个版本中的一个。

531X133PRUAMG1 是一块方形板，每个角落都有一个工厂制造的钻孔。董事会带有圆形的GE徽标，董事会编号和代码，如92/38,009/01,002/01,006/01和F31X133PRUALG1。代码可能位于 PCB 的正面或背面。

531X133PRUAMG1 具有允许连接的组件，例如三位置端子条。这在一侧标记为TACH +，在另一侧标记为TACH - 。该板具有两个垂直引脚电缆连接器和一个 16 针（垂直）接头连接器。

531X133PRUAMG1 由电位计 （7，）、电阻网络阵列 （5，）、电阻器（超过 100，）、二极管和电容器组成。电容器因使用的材料而异，但包括铝电解、聚酯乙烯基和由陶瓷材料制成的电容器。该板具有 15 个跳线开关和多个 TP 测试点。它有一个开关组件（标记为“Tach Range”），开关上有七个单独的拨动。如果需要有关电路板或其组件的更多信息，可以通过GE出版物（如用户指南和手册）找到。

531X133PRUAMG1 过程接口板 具有允许连接的组件

【英文介绍】

The 531X133PRUAMG1 is a PCB board component manufactured by GE. The PCB is designed to work with several of GE's common drive systems. Refer to the user's guide or manual for your specific system to determine compatibility.

531X133PRUAMG1 is used as a process interface board. Interface components are typically used to amplify, isolate, filter their input signals and convert them into output signals suitable for the control system to which they are connected. The PRUAM board is just one of several versions in the series.

The 531X133PRUAMG1 is a square plate with a factory-made drill hole at each corner. The board of directors of the board with a circular GE logo, serial number and code, such as 92/38009/01002/01006/01 and F31X133PRUALG1. The code may be located on the front or back of the PCB.

The 531X133PRUAMG1 has components that allow connection, such as a three-position terminal strip. This is labeled TACH + on one side and TACH - on the other. The board has two vertical pin cable connectors and a 16-pin (vertical) splice connector.

The 531X133PRUAMG1 consists of a potentiometer (7,), resistor network array (5,), resistor (more than 100,), diode and capacitor. Capacitors vary depending on the material used, but include electrolytic aluminum, polyester vinyl, and capacitors made of ceramic materials. The board has 15 jumper switches and multiple TP test points. It has a switch assembly (labeled "Tach Range") with seven individual toggles on the switch. If you need more information about the board or its components, you can find it through GE publications such as user guides and manuals.

531X133PRUAMG1 过程接口板 具有允许连接的组件

【其他型号推荐】