531X133PRUAJG1 过程接口卡 通用驱动系统

【产品详情】

531X133PRUAJG1是由通用电气公司制造的印刷电路板。该板以及 531x 系列板的其余部分设计用于通用电气制造的许多通用驱动系统。驱动器系统的用户指南或手册可能包含有关订购兼容驱动器的信息。

531X133PRUAJG1 用作过程接口板。这是 531x 系列中可用的众多过程接口板版本之一。董事会标有 GE 徽标、董事会用途和 ID 号，以及其他代码，如 FR00/0、002/0、004/0、005/0、003/0 和 F31X133PRUAJG1。该板在工厂的四个角落都钻孔，以便安装。

531X133PRUAJG1 覆盖有组件和书面指示符标记，便于识别电路板部件。该板具有几条金属膜电阻器线。它们散布着二极管和陶瓷电容器。531X133PRUAJG1还使用电解电容器和其他材料的电容器。电路板上的其他类似元件包括七个电位计和六个电阻网络阵列。

531X133PRUAJG1 有两个垂直针（公）电缆连接器。它有一个 16 针接头连接器。该板有一个 3 螺钉端子条，位于电路板的一角;该组件在一侧标记在 TACH （-） 和另一侧 TACH （+）。有一个标记为“转速范围”的开关组件。该开关配有七个单独的拨动开关，可设置为“开”或“关”。板上的其他组件包括跳线开关、TP 测试点和集成电路。

531X133PRUAJG1 过程接口卡 通用驱动系统

【英文介绍】

The 531X133PRUAJG1 is a printed circuit board manufactured by General Electric. The board, along with the rest of the 531x series board, is designed for use in many general purpose drive systems manufactured by GE. The drive system's user guide or manual may contain information about ordering compatible drives.

531X133PRUAJG1 is used as a process interface board. This is one of the many process interface board versions available in the 531x series. The board is marked with the GE logo, board purpose and ID number, and other codes such as FR00/0, 002/0, 004/0, 005/0, 003/0, and F31X133PRUAJG1. The board is drilled in all four corners of the plant for installation.

The 531X133PRUAJG1 is covered with component and written indicator markers for easy identification of board components. The plate has several metal film resistor lines. They are interspersed with diodes and ceramic capacitors. The 531X133PRUAJG1 also uses electrolytic capacitors and capacitors of other materials. Other similar components on the board include seven potentiometers and six resistor network arrays.

The 531X133PRUAJG1 has two vertical pin (male) cable connectors. It has a 16-pin connector. The board has a 3-screw terminal bar located at one corner of the circuit board; The component is marked on one side with TACH (-) and on the other side with TACH (+). There is a switch assembly labeled "Speed range". The switch is equipped with seven individual toggle switches that can be set to "on" or "off". Other components on the board include jumper switches, TP test points and integrated circuits.

531X133PRUAJG1 过程接口卡 通用驱动系统

【其他型号推荐】