531X133PRUAFG1 GE 工艺接口板

【产品详情】

531X133PRUAFG1是GE创建的印刷电路板组件，用于其许多通用驱动系统。购买前，请确保此主板与您的驱动系统兼容。

531X133PRUAFG1 用作过程接口板。 它标有GE标志，董事会ID号和其他几个代码/标记。这包括 F31X33PRUAFG1、FR00/0、002/0 和 004/0。电路板表面的元件标有参考标志，以便于参考。

531X133PRUAFG1 由陶瓷、电解材料和聚酯乙烯基等材料制成的电容器组成。电阻器倾向于金属膜。该板还由六个电阻网络阵列和七个电位计组成。电位计单独标有它们负责控制的范围，例如“PF GAIN”。

531X133PRUAFG1 表面的连接器包括一个针座连接器、两个垂直引脚连接器（公头）和一个三螺钉连接端子条。 电路板在每个角落钻孔以进行安装。它具有 1 个跳线开关和多个 TP 测试点。电路板表面有九个集成电路。 还有一个开关组件，其表面有七个单独的开关开关。每个开关都有编号。交换机标记为“SW<>”，也标记为“Tach Range”。每个开关都可以单独设置为“开”或“关”位置。

531X133PRUAFG1 GE 工艺接口板

【英文介绍】

The 531X133PRUAFG1 is a printed circuit board component created by GE for use in many of its general-purpose drive systems. Before buying, make sure this motherboard is compatible with your drive system.

531X133PRUAFG1 is used as a process interface board. It is marked with the GE logo, board ID number and several other codes/tags. This includes F31X33PRUAFG1, FR00/0, 002/0, and 004/0. The components on the surface of the circuit board are marked with reference marks for easy reference.

The 531X133PRUAFG1 consists of capacitors made of materials such as ceramics, electrolytic materials and polyester vinyl. Resistors tend to be metal films. The board also consists of six resistor network arrays and seven potentiometers. Potentiometers are individually labeled with the area they are responsible for controlling, e.g. "PF GAIN".

The connector on the 531X133PRUAFG1 surface consists of a pin holder connector, two vertical pin connectors (male), and a triple screw connection terminal strip. Boards are drilled at each corner for installation. It has 1 jumper switch and multiple TP test points. There are nine integrated circuits on the surface of the board. There is also a switch assembly with seven individual switch switches on its surface. Each switch is numbered. The switch is marked with SW<>, which is also marked with Tach Range. Each switch can be individually set to the "on" or "off" position.

531X133PRUAFG1 GE 工艺接口板

【其他型号推荐】