IC693BEM340 总线控制器模块 系统中央PLC的通信

【产品详情】

IC693BEM340 FIP总线控制器模块由GE发那科设计和制造，用作系列90-30 I/O网络与系统中央PLC之间的接口。它的目的是安装在同一机架的可编程逻辑控制器，也从相同的电源馈电。使用GE Fanuc IC693BEM340 FIP总线控制器模块不仅可以实现I/O网络与系统中央PLC的通信，还可以为现场设备的配置数据提供安全的存储空间，并且可以用作集中故障排除平台。模块的正面顶部附近有6个led, 2个用于FIP(工厂仪表协议)网络连接的串行端口，以及一个用于配置的额外RS-485串行端口。

IC693BEM340模块对FIP网络的支持很重要，因为工厂仪表协议是一个试图标准化电子工业网络系统的国际通信系统。它允许plc之间的I/O数据交换和广泛的现场设备，如限位开关，电磁阀，电机启动器和压力传感器。GE Fanuc IC693BEM340 FIP总线控制器模块是任何自动控制平台的核心部分，使用FIP网络与系列90-30 PLC作为主要处理硬件，例如运动控制，产品包装和散装处理机械中的工业应用。GE Fanuc IC693BEM340 FIP总线控制器模块的最大电流消耗为1.2安培，可在0至55摄氏度(32至131华氏度)的温度范围内工作。

IC693BEM340 总线控制器模块 系统中央PLC的通信

【英文介绍】

The IC693BEM340 FIP bus controller module was designed and manufactured by GE Fanuc as the interface between the series 90-30 I/O network and the system's central PLC. It is designed to be mounted on the same rack as a programmable logic controller that is also fed from the same power supply. The use of GE Fanuc IC693BEM340 FIP bus controller module can not only realize the communication between the I/O network and the central PLC of the system, but also provide a secure storage space for the configuration data of the field equipment, and can be used as a centralized troubleshooting platform. Near the front top of the module are six leds, two serial ports for FIP(Factory Instrumentation Protocol) network connectivity, and an additional RS-485 serial port for configuration.

The IC693BEM340 module's support for FIP networks is important because the Factory Instrumentation Protocol is an international communication system that attempts to standardize network systems for the electronics industry. It allows I/O data exchange between PLCS and a wide range of field devices such as limit switches, solenoid valves, motor starters and pressure sensors. The GE Fanuc IC693BEM340 FIP Bus controller module is the core part of any automatic control platform, using the FIP network with the series 90-30 PLC as the main processing hardware, such as motion control, product packaging and bulk handling machinery in industrial applications. The GE Fanuc IC693BEM340 FIP bus controller module has a maximum current consumption of 1.2 amps and can operate in a temperature range of 0 to 55 degrees Celsius (32 to 131 degrees Fahrenheit).

IC693BEM340 总线控制器模块 系统中央PLC的通信

【其他型号推荐】