IC693ACC310 可编程逻辑控制器 平台附件模块

【产品详情】

IC694ACC310是系列90-30可编程逻辑控制器(PLC)平台附件模块。该模块在技术上称为填充模块，有时也称为槽位填充模块或假模块。该元件主要用于覆盖90-30系列底板的空槽，保护电子电路免受灰尘、污垢、油、水、化学和其他工业元素的损坏。

IC694ACC310占用机箱单槽位。它支持在电源下拆卸和插入，因为这个填充模块不连接到背板，因为它不携带任何电子电路，但是，在经常暴露于振动和冲击的旧装置中，应小心插入和拆卸。

IC694ACC310可安装在安装CPU的本地背板上;扩展背板，远程背板或沿网络接口模块(NIU)的分布式I/O站。IC694ACC310的安装实例数量没有限制。它可以根据需要和控制系统的要求使用。

IC694ACC310的物理尺寸与功能齐全的模块相似，但是，由于该组件没有LED状态指示灯和模块插入，因此无法使用监控功能和模块I/O标记。

将IC694ACC310安装到系列90-30底板上时，请将IC694ACC310直接对准空槽的顶部，并沿相邻模块的边缘对齐。轻轻推动模块并按压，直到顶部和底部闩锁连接到底板上。

IC693ACC310模块是GE发那科90-30系列的填充模块。关于GE发那科IC693ACC310填充模块的一个值得注意的事情是，它与GE发那科系列90-30可编程逻辑控制器产品线中的各种plc或可编程逻辑控制器兼容。当使用该产品线中的一个plc时，模块底板中的一些I/O插槽在控制器的应用程序中将是冗余的，除非安装了IC693ACC310填充模块，否则它们将为空。假模块可以防止灰尘进入CHS机架的连接器。在使用过程中，为了防止灰尘进入组件内部，必须确保底板中所有未使用的槽位都被填充，这些槽位可以使用有源设备或模块填充，也可以使用空白的填充模块填充，如GE Fanuc IC693ACC310填充模块。

GE Fanuc系列90-30 IC693ACC310填充模块的设计易于使用，这意味着技术人员不需要大量的技术知识就可以正确安装。

 IC693ACC310 可编程逻辑控制器 平台附件模块

【英文介绍】

The IC694ACC310 is a series 90-30 Programmable Logic controller (PLC) platform accessory module. This module is technically called a filler module, and is sometimes called a slot filler module or a dummy module. This element is mainly used to cover the empty slots of the 90-30 series baseplate, protecting the electronic circuit from dust, dirt, oil, water, chemical and other industrial elements.

The IC694ACC310 occupies a single slot in the chassis. It supports removal and insertion under power supply, as this fill module is not connected to the backplane, as it does not carry any electronic circuits, however, in older units that are often exposed to vibration and shock, care should be taken to insert and remove.

The IC694ACC310 can be installed on the local backplane where the CPU is installed. Extended backplanes, remote backplanes or distributed I/O stations along network interface modules (NIU). There is no limit to the number of installed instances of IC694ACC310. It can be used according to the needs and requirements of the control system.

The physical size of the IC694ACC310 is similar to that of a fully functional module, however, since this component has no LED status indicator and module insertion, monitoring functions and module I/O markers cannot be used.

When mounting the IC694ACC310 to the Series 90-30 baseplate, align the IC694ACC310 directly with the top of the empty slot and line it up along the edge of the adjacent module. Gently push the module and press until the top and bottom latches are attached to the baseplate.

The IC693ACC310 module is a filler module for the GE Fanuc 90-30 series. One noteworthy thing about the GE Fanuc IC693ACC310 fill module is that it is compatible with a variety of PLCS or programmable logic controllers in the GE Fanuc series 90-30 programmable logic controller product line. When using one of the PLCS in this product line, some of the I/O slots in the module backboard will be redundant in the controller's application, and they will be empty unless the IC693ACC310 fill module is installed. The dummy module prevents dust from entering the CHS rack connectors. In order to prevent dust from entering the interior of the assembly during use, it is necessary to ensure that all unused slots in the baseplate are filled, which can be filled with active devices or modules, or with blank filling modules such as the GE Fanuc IC693ACC310 filling module.

The GE Fanuc Series 90-30 IC693ACC310 filling module is designed to be easy to use, which means that technicians do not need a lot of technical knowledge to install correctly.

【其他型号推荐】