IC660BLC001 GE发那科线缆 电缆是带连接器

【产品详情】

IC660BLC001线缆为GE发那科线缆，长度为15英寸。IC660BLC001电缆是带连接器的贝尔登9182型电缆。IC660BLC001电缆是一种预制电缆，其连接器可简化I/O块之间的布线。电缆阻抗为150欧姆。还有36英寸GE发那科电缆，建议用于现场控制安装。IC660BLC001电缆用于将总线连接到Genius I/O块，Genius I/O块是智能和可配置的I/O模块。一个模块的两个主要组件是电子组件和终端组件。包括通信和I/O在内的有源元件是电子组件的一部分。电子组件也可以在不干扰现场布线的情况下拆除。

Genius I/O块的配置数据存储在终端组件中。因此，如果电子组件发生变化，则该块不需要重新配置。大范围的I/O模块可用，包括8、16和32输入模块，RTD输入模块，热电偶输入模块，以及输入和输出模块。Genius I/O块可以安装在距离计算机或PLC最远7500英尺的地方。天才I/O块可以安装在面板内，设备上，并在接线盒。Genius I/O块可以在高达60摄氏度的环境下可靠运行。IC660BLC001电缆用于总线连接I/O块。IC660BLC001电缆连接Serial 1、Serial 2、Shield-In和Shield-Out端子。将总线连接到Genius I/O块的推荐方法是将其直接连接到块上的终端组件。

IC660BLC001 GE发那科线缆 电缆是带连接器

【英文介绍】

The IC660BLC001 cable is a GE Fanuc cable with a length of 15 inches. The IC660BLC001 cable is a Belden Type 9182 cable with connectors. The IC660BLC001 cable is a prefabricated cable which terminates in connectors that simplify the wiring between the I/O blocks. The impedance of the cable is 150 Ohms. A 36-inch GE Fanuc cable is also available and it is recommended for field control installations. The IC660BLC001 cable is used to make bus connections to Genius I/O blocks which are intelligent and configurable I/O modules. The 2 main components of a block are the electronics assembly and the terminal assembly. Active components including communications and I/O are part of the electronics assembly. The electronics assembly can also be removed without any disturbance to the field wiring.

The configuration data of the Genius I/O block is stored in the terminal assembly. Therefore, the block does not need reconfiguration if the electronics assembly is changed. A large range of I/O blocks is available, including blocks with 8, 16, and 32 inputs, blocks with RTD inputs, blocks with thermocouple inputs, and blocks with both inputs and outputs. Genius I/O blocks can be mounted up to 7500 feet away from the computer or PLC. Genius I/O blocks can be mounted inside panels, on equipment, and in junction boxes. Genius I/O blocks can operate reliably at up to 60 degrees Celsius. The IC660BLC001 cable is used to make bus connections to I/O blocks. The IC660BLC001 cable connects to the Serial 1, Serial 2, Shield-In, and Shield-Out terminals. The recommended method of connecting the bus to Genius I/O block is to wire it directly to the terminal assembly on the block.

IC660BLC001 GE发那科线缆 电缆是带连接器

【其他型号推荐】