IC660BBS102 具有4个隔离组中的8个电路

【产品详情】

IC660BBS102是由艾默生自动化制造的天才模块I/o。该模块主要具有4个隔离组中的8个电路，每组2个通道，可配置为115 VAC和125 VDC电压兼容的输入或输出。Block I/O模块支持Genius I/O协议，实现了通过Genius Bus协议直接通信的能力。

IC660BBS102能够通过比较模块的输出命令与内置内部开关到块I/O设备的状态来检测失败的开关诊断。此块I/O支持冗余处理器，并能够保持最后状态，输出脉冲测试能力和输出电源默认值。

IC660BBS102还支持接受来自手持监视器或主控制器的重启命令。当配置为三态输入时，它还配备了诊断功能，如过温断线;对电路的I/O功率损耗检测;过载检测，停机和空载检测。

IC660BBS102的尺寸为8.83英寸(22.44厘米)x 3.34英寸(8.48厘米)x 3.91英寸(9.93厘米)，重约4磅。(1.8公斤)。它是用单元OK和I/O使能LED状态指示灯以及开关逻辑侧的电路LED构建的。它设计用于面板安装和支持右侧向上或倒置方向。通过支持Genius I/O协议，IC660BBS102可以通过多滴或菊花链拓扑进行连接，其中也可以连接具有Genius I/O功能的设备网络。

IC660BBS102输出模块为GE Fanuc Genius I/O输出模块。IC660BBS102输出块上有8个电路，分为4个独立的组，每组2个电路。这些组是隔离的，额定直流电压为125伏，交流电压为115伏。IC660BBS102输出块取代旧的IC660BBS100输出块模型。如果输出的命令状态与I/O块上内部开关的实际状态不匹配，那么IC660BBS102输出块和IC660BBS100输出块都会报告一个失败的开关诊断。IC660BBS102输出模块可以从直流或交流电压源操作。交流电压时，输入范围为交流93 ~ 132伏;直流电压时，输入范围为直流105 ~ 132伏。交流输入时，支持的频率范围为47 ~ 63赫兹。

IC660BBS102输出块在任意两个输出组之间或组与地之间的隔离额定为250伏交流。IC660BBS102输出块的特性包括交流或直流电路电压、输出脉冲测试能力、CPU冗余和总线交换模块控制。在每个输出电路中都集成了电子熔断，在发生短路的输出电路发生短路后5微秒内将其关闭，以保护block。IC660BBS102输出块可以从CPU或手持式显示器重新启动。IC660BBS102输出块重4磅，尺寸为8.8 x 3.3 x 3.9英寸。当8个输出电路全部接通并输出2安培电流时，模块的最大散热额定值可达45.6瓦。

IC660BBS102 具有4个隔离组中的8个电路

【英文介绍】

The IC660BBS102 is a genius module I/o manufactured by Emerson Automation. The module primarily features 8 circuits in 4 isolation groups of 2 channels each that can be configured for 115 VAC and 125 VDC voltage compatible inputs or outputs. The Block I/O module supports the Genius I/O protocol, which enables direct communication over the Genius Bus protocol.

The IC660BBS102 is capable of detecting failed switch diagnostics by comparing the module's output commands with the status of the built-in internal switch to the block I/O device. This block I/O supports redundant processors and is able to maintain the final state, output pulse test capability, and output power default values.

The IC660BBS102 also supports accepting restart commands from a handheld monitor or host controller. When configured as a three-state input, it is also equipped with diagnostic functions, such as overtemperature break; I/O power loss detection of the circuit; Overload detection, shutdown and no-load detection.

The IC660BBS102 measures 8.83 inches (22.44 cm)x 3.34 inches (8.48 cm)x 3.91 inches (9.93 cm) and weighs about 4 pounds. (1.8 kg). It is built with the unit OK and I/O enable LED status indicator and the circuit LED on the logic side of the switch. It is designed for panel mounting and supports right side up or upside down orientation. By supporting the Genius I/O protocol, the IC660BBS102 can be connected via a multi-drop or Daisy chain topology, where it can also connect to a network of devices with Genius I/O capabilities.

The IC660BBS102 output module is the GE Fanuc Genius I/O output module. There are 8 circuits on the IC660BBS102 output block, divided into 4 independent groups, each group of 2 circuits. These groups are isolated and rated at 125 volts DC and 115 volts AC. The IC660BBS102 output block replaces the old IC660BBS100 output block model. If the output command status does not match the actual status of the internal switch on the I/O block, both the IC660BBS102 output block and the IC660BBS100 output block report a failed switch diagnosis. The IC660BBS102 output module can be operated from a DC or AC voltage source. For AC voltage, the input range is 93 ~ 132 volts AC; For DC voltage, the input range is 105-132 volts DC. For AC input, the supported frequency range is 47 to 63 Hz.

The IC660BBS102 output block is rated at 250 volts AC for isolation between any two output groups or between groups and ground. The IC660BBS102 output block features include AC or DC circuit voltage, output pulse test capability, CPU redundancy, and bus switch module control. Electronic fuses are integrated into each output circuit to protect the block by turning off the output circuit that shorted within 5 microseconds of its occurrence. The IC660BBS102 output block can be restarted from the CPU or handheld display. The IC660BBS102 output block weighs 4 pounds and measures 8.8 x 3.3 x 3.9 inches. When all eight output circuits are connected and output 2 amps, the maximum heat dissipation rating of the module can reach 45.6 watts.

IC660BBS102 具有4个隔离组中的8个电路

【其他型号推荐】