IC660BBD101  I/O模块系列 该系列模块是独立的面板安装设备

【产品详情】

IC660BBD101是艾默生自动化I/O模块，是Genius I/O模块系列的一部分。该系列模块是独立的面板安装设备，用于连接现场设备和驱动元件或电气负载。它具有紧凑的无机架设计，每个I/O通道可独立配置为输入和输出通道。

IC660BBD101设计有8个I/O通道或电路，可作为输入或输出操作。它的工作电压范围为93-132 VAC, 47-63 Hz，标称电平为115 VAC。它提供了单元OK和I/O使能LED指示灯，作为模块状态指示灯，向用户提供操作状态。它也有一个专用的LED为每个电路，以确定电路或通道的状态。它的最大散热为43。5瓦和电源断电时间为1个周期或16.7 ms @ 60hz或20 ms @ 50hz。

输入通道的常用参数包括10至100毫秒的可选滤波器时间，增量为10毫秒，典型的输入处理时间为2毫秒，加上通道配置的滤波器。输入通道能够自我诊断，能够检测断线，过温或故障开关。

模块输出参数包括稳态输出电流为2a，最大浪涌电流为25a，峰值可达2个周期，最大块输出电流为15a @ 35o和7.5 A @ 60o。它包括一个电子短路跳闸和输出诊断短路，过载，空载，故障开关，和过温。

GE Fanuc IC660BBD101 I/O模块是GE Fanuc的Genius I/O产品线的离散I/O模块。IC660BBD101离散I/O模块是一种可配置的智能设备，可以作为通信总线和离散执行器或传感器等离散设备之间的接口。这个I/O块包含8个电路，它们都是相同的，都可配置为输入或输出，并且都额定为115伏交流电压。IC660BBD101离散I/O块具有几个有用的功能，包括输入滤波器时间可在10到100毫秒之间选择，输出反馈可用于监控，所有输出的脉冲测试和总线切换。

GE Fanuc Genius I-O IC660BBD101分立I/O块不需要单独的块电源，因为它的控制电源来自连接到终端的I/O设备电压。其工作电压范围为94至132伏交流电，频率为47至63赫兹。IC660BBD101独立I/O模块重4磅，尺寸为8.8 x 3.3 x 3.9英寸。这个I/O块上的所有8个电路都由电子保险丝保护，如果输出电流在打开时超过30安培，或者输出电流在2个周期后超过20安培，保险丝将在5毫秒内关闭电路。被关闭的电路可以通过中央处理器或手持监视器的命令恢复。

IC660BBD101  I/O模块系列 该系列模块是独立的面板安装设备

【英文介绍】

The IC660BBD101 is an Emerson Automation I/O module, part of the Genius I/O module family. The series modules are standalone panel mount devices for connecting field devices to drive components or electrical loads. It has a compact rackless design, and each I/O channel can be configured independently as an input and output channel.

The IC660BBD101 is designed with eight I/O channels, or circuits, that can be operated as input or output. It operates in a voltage range of 93-132 VAC, 47-63 Hz, and a nominal level of 115 VAC. It provides unit OK and I/O enable LED indicators that act as module status indicators to provide the user with the operating status. It also has a dedicated LED for each circuit to determine the status of the circuit or channel. It has a maximum heat dissipation of 43. 5 watts and power outage time is 1 cycle or 16.7 ms @ 60hz or 20 ms @ 50hz.

Common parameters for the input channel include an optional filter time of 10 to 100 ms in increments of 10 ms and a typical input processing time of 2 ms, plus a filter configured for the channel. The input channel is self-diagnostic and can detect disconnection, overtemperature or faulty switches.

Module output parameters include a steady state output current of 2a, a maximum surge current of 25a, a peak of up to 2 cycles, and a maximum block output current of 15a@35o and 7.5A@60o. It includes an electronic short-circuit trip and outputs diagnostic short-circuits, overload, no-load, fault switches, and overtemperatures.

The GE Fanuc IC660BBD101 I/O module is a discrete I/O module for GE Fanuc's Genius I/O product line. The IC660BBD101 discrete I/O module is a configurable smart device that acts as an interface between a communication bus and discrete devices such as discrete actuators or sensors. This I/O block contains eight circuits, all of which are identical, all configurable as inputs or outputs, and all rated at 115 volts AC. The IC660BBD101 discrete I/O block has several useful features, including input filter times that can be selected between 10 and 100 milliseconds, output feedback that can be used for monitoring, pulse testing of all outputs, and bus switching.

The GE Fanuc Genius I-O IC660BBD101 discrete I/O block does not require a separate block power supply because its control power comes from the I/O device voltage connected to the terminal. It operates in a voltage range of 94 to 132 volts AC and a frequency of 47 to 63 Hertz. The IC660BBD101 standalone I/O module weighs 4 pounds and measures 8.8 x 3.3 x 3.9 inches. All eight circuits on this I/O block are protected by an electronic fuse that will turn off the circuit within 5 milliseconds if the output current exceeds 30 amps when opened, or 20 amps after 2 cycles. The circuit that has been shut down can be restored by command from the central processor or handheld monitor.

IC660BBD101  I/O模块系列 该系列模块是独立的面板安装设备

【其他型号推荐】