IC660BBA021 电阻温度检测器输入块

【产品详情】

IC660BBA021是一个天才I/O块。该硬件是一个电阻温度检测器(RTD)输入块，外部供电电压范围为24/48 VDC。该I/O块配备了六(6)个输入通道，通道分组由三(3)组组成，每组两(2)个通道，每个通道的更新频率为每400ms、800ms或1600ms一次，输入滤波器范围为每块400ms、800ms、1600ms。

这个RTD I/O块是理想的温度应用，因为RTD传感器特别用于测量温度。此外，这个I/O块能够从传感器和其他仪器接收0-5000欧姆的电阻输入范围。该模块兼容RTD传感器，如铂，铜和镍RTD。它配备了内置的线性化和信号调理，使该模块能够以工程单位的形式将适当条件的输入数据传输到中央处理单元(CPU)，并以十分之一摄氏度，华氏度，欧姆或计数报告。

报警阈值，Alpha类型和输入滤波器时间也可以配置与IC660BBA021天才I/O块。它是出厂校准的，在模块的使用寿命期间不需要重新校准。此外，IC660BBA021还具有输入短检、内部故障检测、接线错误检测、断线检测、输入超量程和过量程指示、高、低输入告警等诊断功能。这些错误支持抑制，其中，它可能不会被报告给CPU，因此，不转发到CPU诊断缓冲区。

IC660BBA021 RTD输入模块经过工厂校准，以确保准确的性能，同时减少频繁的后续重新校准的需要。它还提供了一些额外的功能，如报警阈值、输入滤波器时间和线性化。模块的最大散热功率为7w。它也有0到5000欧姆的电阻测量。模块的输入每400毫秒、800毫秒和1600毫秒更新一次。IC660BBA021 RTD输入模块的诊断功能包括输入短检、接线错误检测、超量程和过量程输入指示。用户可以为任何选择的活动输入禁用诊断消息。禁用诊断消息将停止向CPU发送消息。但是，用户仍然可以收到发送到手持监视器的诊断消息。安装时，请将模块安装在合适的机箱中，同时考虑散热所需的空间。

IC660BBA021 电阻温度检测器输入块

【英文介绍】

IC660BBA021 is a genius I/O block. The hardware is a resistance temperature detector (RTD) input block with an external supply voltage range of 24/48 VDC. The I/O block is equipped with six (6) input channels, and the channel grouping consists of three (3) groups of two (2) channels each with an update frequency every 400ms, 800ms or 1600ms, and the input filter range is each 400ms, 800ms or 1600ms.

This RTD I/O block is ideal for temperature applications, as RTD sensors are specifically used to measure temperature. In addition, this I/O block is capable of receiving a resistance input range of 0-5000 ohms from sensors and other instruments. The module is compatible with RTD sensors such as platinum, copper and nickel RTDS. It is equipped with built-in linearization and signal conditioning that enables the module to transmit input data with appropriate conditions to a central processing unit (CPU) in the form of engineering units and report in one-tenth of a degree Celsius, Fahrenheit, ohm, or count.

Alarm thresholds, Alpha types and input filter times can also be configured with IC660BBA021 genius I/O blocks. It is factory calibrated and does not require recalibration during the life of the module. In addition, the IC660BBA021 also has diagnostic functions such as input short check, internal fault detection, wiring error detection, disconnection detection, input over-range and over-range indication, and high and low input alarms. These errors support suppression, where it may not be reported to the CPU and, therefore, is not forwarded to the CPU diagnostic buffer.

The IC660BBA021 RTD input module is factory calibrated to ensure accurate performance while reducing the need for frequent subsequent recalibrations. It also provides some additional features such as alarm thresholds, input filter times, and linearization. The maximum heat dissipation power of the module is 7w. It also has resistance measurements from 0 to 5000 ohms. The module's inputs are updated every 400 ms, 800 ms and 1600 ms. The diagnostic functions of the IC660BBA021 RTD input module include input short check, wiring error detection, over range and over range input indication. The user can enter a disable diagnostic message for any selected activity. Disabling diagnostic messages will stop sending messages to the CPU. However, the user can still receive diagnostic messages sent to the handheld monitor. Install the module in a proper chassis and take into account the space required for heat dissipation.

IC660BBA021 电阻温度检测器输入块

【其他型号推荐】