>>>>>型号:IS220PTURH1A REV D | PTUR 涡轮机专用主跳闸模块 | 具有自动重新配置功能
[产品说明]
品牌： GE
型号：IS220PTURH1A REV D
产品类型：PTUR 涡轮机专用主跳闸模块
付款方式：电汇，西联
汇款 装运港：中国厦门
交货时间：1-3个工作日
条件：全新和 100% 原始
保修：12 个月
IS220PTURH1A是主涡轮机专用主跳闸包。 该组件在涡轮机控制终端板和一个或两个以太网网络之间提供电气接口。该电池组的输出通过连接到相关端子板的 DC-62 引脚连接器进行。
IS220PTURH1A采用黑色外壳制成，带有空气流通开口。该外壳的正面有多个 LED 指示灯，以及一个 IR(红外端口)。此包中未使用此端口。在这个外壳内，有一个处理器板、一个专门用于涡轮机控制的第二块板和一个模拟采集辅助板。电池组安装在TTURH1C端子板上。该处理器板具有两个 10/100 以太网端口、闪存和 RAM、一个用于识别的只读芯片、一个内部温度传感器和一个复位电路。
IS220PTURH1A REV D主要功能：
作为初级涡轮专用初级脱扣包，该组件通过电气接口将涡轮机控制终端板连接到一个或两个以太网网络。
具有自动重新配置功能，可以自动从控制器下载到I/O包中。
具有四个被动磁速度输入，电路灵敏度可以检测2转/分的回转齿轮速度，以监控涡轮机的旋转状态。
IS220PTURH1A REV D硬件规格：
拥有一个带有空气循环孔的黑色外壳，机箱正面有各种LED指示灯和一个红色急停按钮。
处理器板上配备2个10/100以太网端口、闪存、RAM、只读芯片、内部温度传感器和复位电路。
使用QNX操作系统，配备一个667兆赫的飞思卡尔8349处理器。
由12瓦、18-36 V直流电源供电，可在0到65摄氏度的温度范围内工作，无需风扇冷却。
IS220PTURH1A REV D电气特性：
交流220VAC供电，适用于驱动永磁交流伺服电机。
集成操作面板，用于系统测试和驱动器状态显示。
[其他型号推荐]
>>>>> Model :IS220PTURH1A REV D | PTUR turbine special main trip module | has automatic reconfiguration function
Brand: GE
Model: IS220PTURH1A REV D
Product Type: PTUR turbine special main trip module
Payment method: Wire transfer, Western Union
Port of shipment for remittance: Xiamen, China
Delivery time: 1-3 working days
Condition: New and 100% original
Warranty: 12 months
IS220PTURH1A is a special main trip package for the main turbine. This component provides an electrical interface between the turbine control terminal board and one or two Ethernet networks. The output of this battery pack is performed via a DC-62 pin connector connected to the relevant terminal board.
The IS220PTURH1A is made of black housing with an air outlet. The front of the housing has multiple LED indicators, as well as an IR (infrared port). This port is not used in this package. Inside this enclosure, there is a processor board, a second board dedicated to turbine control, and an analog acquisition auxiliary board. The battery string is installed on the TTURH1C terminal board. The processor board features two 10/100 Ethernet ports, flash memory and RAM, a read-only chip for identification, an internal temperature sensor and a reset circuit.
IS220PTURH1A REV D Main functions:
As a primary trip package for the primary turbine, this component connects the turbine control terminal board to one or two Ethernet networks via an electrical interface.
With automatic reconfiguration, it can be automatically downloaded from the controller to the I/O package.
With four passive magnetic speed inputs, the circuit sensitivity can detect a rotating gear speed of 2 RPM to monitor the rotating state of the turbine.
IS220PTURH1A REV D Hardware specifications:
It has a black case with air circulation holes, various LED indicators on the front of the case and a red emergency stop button.
The processor board is equipped with two 10/100 Ethernet ports, flash memory, RAM, read-only chip, internal temperature sensor and reset circuit.
It uses the QNX operating system and is equipped with a 667 MHZ Freescale 8349 processor.
Powered by 12-watt, 18-36 V DC power supply, it can operate in a temperature range of 0 to 65 degrees Celsius without fan cooling.
IS220PTURH1A REV D Electrical characteristics:
Ac 220VAC power supply, suitable for driving permanent magnet AC servo motor.
Integrated operation panel for system testing and driver status display.
