>>>>>型号:IS220PPROH1A REV: D 备用涡轮保护 （PPRO） I/O 包 具有电压检测的现场布线限制
[产品说明]
品牌： GE
型号：IS220PPROH1A REV: D
产品类型：备用涡轮保护 (PPRO) I/O 包
付款方式：电汇，西联
汇款 装运港：中国厦门
交货时间：1-3个工作日
条件：全新和 100% 原始
保修：12 个月
主要用途：
IS220PPROH1A主要用于为特定的涡轮机现场设备提供直接接口。这种设置消除了或减少了以前连接到现场设备所需的大部分仪器，提高了运行可靠性并减少了长期维护。
配合使用的组件：
该模块通常与TREAH_A端子板配合使用，特别适用于航改型涡轮机紧急跳闸应用。它可以连接到屏障式或箱式接线端子。
技术特点：
IS220PPROH1A具有电压检测的现场布线限制，这限制了电缆长度为1000英尺。这样的设计确保了设备在使用过程中的安全性和稳定性。
功能描述:
I/O 包中包含两个以太网端口、一个电源、一个本地处理器和一个数据采集板。这种设计简化或消除了以前连接现场设备所需的大部分仪器，并提高了运行可靠性并降低了长期维护成本。
该IS220PPROH1A用于航改涡轮紧急跳闸应用，通常与 TREAH 端子板一起使用。该组件可以连接到屏障式或盒式接线端子。对于电压检测，该器件具有现场接线限制，将电缆长度限制为 1,000 英尺的 18 AWG 接线。从 BPPB P-Pack 切换到 BPPC P-Pack 时，无法自动重新配置组件。
零件的前面板标有组件 ID 号和许多 LED 指示。它们成对排列在前面板上。PWR/ATTN 是第一对，LINK/TxRx 和 ENET 1 是第二对，LINK/TxRx 和 ENET2 是第三对。最后一个组件是红外端口，它位于面板的底部。
该器件配备了一个高速处理器和两个完全独立的 10/100 以太网端口。该套件中包括一个硬件复位电路和一个看门狗定时器。内置传感器可跟踪温度.
[其他型号推荐]
>>>>> Model :IS220PPROH1A REV: D Backup Turbine Protection (PPRO) I/O package with field wiring limitations for voltage detection
Brand: GE
Model: IS220PPROH1A REV: D
Product Type: Spare Turbine Protection (PPRO) I/O package
Payment method: Wire transfer, Western Union
Port of shipment for remittance: Xiamen, China
Delivery time: 1-3 working days
Condition: New and 100% original
Warranty: 12 months
Main uses:
The IS220PPROH1A is primarily used to provide a direct interface for specific turbine site equipment. This setup eliminates or reduces much of the instrumentation previously required to connect to field equipment, improving operational reliability and reducing long-term maintenance.
Components used together:
This module is usually used in conjunction with TREAH_A terminal boards and is particularly suitable for emergency trip applications in aircraft retrofit turbines. It can be connected to screen or box terminals.
Technical features:
The IS220PPROH1A has a field wiring limit for voltage detection, which limits the cable length to 1000 feet. This design ensures the safety and stability of the equipment during use.
Function description
The I/O package contains two Ethernet ports, a power supply, a local processor, and a data acquisition board. This design simplifies or eliminates much of the instrumentation previously required to connect field equipment, and improves operational reliability and reduces long-term maintenance costs.
The IS220PPROH1A is intended for emergency trip applications in aero-modification turbines and is commonly used with TREAH terminal boards. The component can be connected to a screen or box terminal. For voltage detection, the device has field wiring limits that limit cable length to 1,000 feet of 18 AWG wiring. Components cannot be automatically reconfigured when switching from BPPB P-Pack to BPPC P-Pack.
The front panel of the part is marked with the component ID number and many LED indicators. They are arranged in pairs on the front panel. PWR/ATTN is the first pair, LINK/TxRx and ENET 1 are the second pair, and LINK/TxRx and ENET2 are the third pair. The final component is the infrared port, which is located at the bottom of the panel.
The device is equipped with a high-speed processor and two fully independent 10/100 Ethernet ports. A hardware reset circuit and a watchdog timer are included in the kit. Built-in sensor to track temperature.
