IS200AEPAH1BKE IS215WEPAH2BB 压力测量模块 监测压缩机入口/出口压力

>>>>>型号:IS200AEPAH1BKE IS215WEPAH2BB  压力测量模块   监测压缩机入口/出口压力

【功能描述】

技术规格

产品编号： IS215WEPAH2B

修订版：IS215WEPAH2BB

系列： 马克六世

板类型：印刷电路板

COM 端口：3 个;COM1、COM2 和微型 9 针插座 D 连接器

以太网接口：10BaseT/AUI 连接器

手册： GEP-9145

制造商： General Electric Industrial Systems

相对湿度：10-95%，无冷凝

冲击：最大 10G，非工作

IS200AEPAH1BKE 和 IS215WEPAH2BB 都是通用电气 （GE） 制造的压力测量模块，用于其工业自动化系统，可能属于 Mark VI Speedtronic 系列。以下是它们的潜在功能和应用的细分：

功能：

压力测量：这两个模块都设计用于测量工业应用中的压力。它们可能会将施加的压力转换为电信号，供控制系统处理。

压力范围：每个模块可测量的特定压力范围可能不同。根据其型号名称，IS200AEPAH1BKE可能适用于较低的压力范围，而IS215WEPAH2BB可以处理更高的压力。

接口：这些模块可能通过通信接口连接到Mark VI控制系统。这可能是标准的工业总线协议，如 Profibus 或 Modbus。

应用（可能）：

IS200AEPAH1BKE和IS215WEPAH2BB的具体应用取决于其压力测量范围以及与Mark VI系统的兼容性。以下是一些一般的可能性：

汽轮机控制：在汽轮机应用中，压力传感器对于监测系统内的各个点至关重要，例如蒸汽入口压力、排气压力和润滑油压力。IS200AEPAH1BKE或IS215WEPAH2BB模块可用于此类测量，具体取决于所需的特定压力范围。

燃气轮机控制：与蒸汽轮机类似，燃气轮机控制系统也需要在各个点进行压力监测。这些模块可用于监测压缩机入口/出口压力、燃气压力和润滑油压力，具体取决于其压力范围。

其他工业流程：压力测量在涡轮机以外的各种工业过程中都是必不可少的。考虑到这些模块与Mark VI系统的兼容性，这些模块可用于监测液压系统、管道或工艺容器中的压力等应用。

【英文介绍】

Technical specification

Product number: IS215WEPAH2B

Revised Edition: IS215WEPAH2BB

Series: Mark VI

Board type: Printed circuit board

COM ports: 3; COM1, COM2 and micro 9-pin socket D connectors

Ethernet interface: 10BaseT/AUI connector

Manual: GEP-9145

Manufacturer: General Electric Industrial Systems

Relative humidity: 10-95%, no condensation

Impact: Maximum 10G, non-working

The IS200AEPAH1BKE and IS215WEPAH2BB are both pressure measurement modules manufactured by General Electric (GE) for use in their industrial automation systems and may belong to the Mark VI Speedtronic family. Here's a breakdown of their potential features and applications:

Features:

Pressure measurement: Both modules are designed to measure pressure in industrial applications. They may convert the applied pressure into an electrical signal for the control system to process.

Pressure range: The specific pressure range that can be measured by each module may vary. Depending on its model name, the IS200AEPAH1BKE may be suitable for lower pressure ranges, while the IS215WEPAH2BB can handle higher pressures.

Interfaces: These modules may be connected to the Mark VI control system via a communication interface. This could be a standard industrial bus protocol such as Profibus or Modbus.

Application (possible) :

The specific application of IS200AEPAH1BKE and IS215WEPAH2BB depends on their pressure measurement range and compatibility with Mark VI systems. Here are some general possibilities:

Steam turbine control: In steam turbine applications, pressure sensors are essential for monitoring various points within the system, such as steam inlet pressure, exhaust pressure, and oil pressure. The IS200AEPAH1BKE or IS215WEPAH2BB modules can be used for such measurements, depending on the specific pressure range required.

Gas turbine control: Similar to steam turbines, gas turbine control systems require pressure monitoring at various points. These modules can be used to monitor compressor inlet/outlet pressure, gas pressure and oil pressure, depending on their pressure range.

Other industrial processes: Pressure measurement is essential in a variety of industrial processes other than turbines. Given their compatibility with Mark VI systems, these modules can be used for applications such as monitoring pressure in hydraulic systems, pipes or process vessels.

【其他型号推荐】