IS220PAICH1B 模拟输入/输出包 28 伏直流电

☆型号：IS220PAICH1B  模拟输入/输出包  28 伏直流电

【产品详情】

IS220PAICH1B型号由通用电气生产，是Mark VI系列的模拟输入/输出包。该型号是 PAIC 装置的第二个版本，与之前版本的 PAIC 组相比，在不同的最小电压下运行。该特定装置的最小电压为 22 伏半直流电。该型号使用的标称电源是 24 伏或 28 伏直流电。

虽然 Mark VI 系列使用 IS220PAICH1B 包，但它可以与一些附件一起使用，也称为端子板;与此特定模拟 I/O 包一起使用的端子板都是 IS200 板，并且是 IS200TBAIH1C、IS200TAIH1A 和 IS200TAIH2A。IS200TBAIH1C 型号是栅栏式接线盒，与IS220PAICH1B组连接和使用时，最小电线尺寸为 22 AWG。

使用此模型时会出现特定的警报，其中一个警报标记为 82-83，它专注于输出并指示IS220PAICH1B包中的自杀继电器不起作用。此警报的可能原因通常是包中的自杀继电器命令与相关反馈不匹配、硬件出现故障或采集板上发生继电器故障。此问题的主要解决方案是更换 I/O 包本身。

☆型号：IS220PAICH1B  模拟输入/输出包  28 伏直流电

【英文介绍】

The IS220PAICH1B model is manufactured by General Electric and is an analog input/output package for the Mark VI series. This model is the second version of the PAIC unit that operates at a different minimum voltage compared to the previous version of the PAIC group. The minimum voltage for this particular device is 22 volts of semi-direct current. The nominal power supply used in this model is either 24 volts or 28 volts direct current.

Although the Mark VI series uses the IS220PAICH1B package, it can be used with some accessories, also known as terminal boards; The terminal boards used with this particular analog I/O packet are all IS200 boards and are IS200TBAIH1C, IS200TAIH1A, and IS200TAIH2A. The IS200TBAIH1C model is a fence type junction box with a minimum wire size of 22 AWG when connected and used with the IS220PAICH1B group.

Specific alarms appear when using this model, one of which is labeled 82-83, which focuses on the output and indicates that the suicide relay in the IS220PAICH1B package is not working. The possible cause of this alarm is usually a mismatch between the suicide relay command in the package and the relevant feedback, a hardware failure, or a relay failure on the acquisition board. The main solution to this problem is to replace the I/O package itself.

☆型号：IS220PAICH1B  模拟输入/输出包  28 伏直流电

【其他型号推荐】