IC693PCM301 可编程协处理器模块 主机控制器

☆型号：IC693PCM301 可编程协处理器模块 主机控制器

【产品详情】

IC693PCM301 是一种可编程协处理器模块 （PCM），其设计与 90-30 系列可编程逻辑控制器 （PLC） 产品系列兼容，该系列以前由 GE Fanuc Automation 总线制造，最近被艾默生自动化收购。该 PCM 模块通过集成的单个 25 针端口支持 Modbus 和 GE Fanuc 的 CCM 协议，该端口本质上是一个两 （2） 端口接口。

该IC693PCM301支持将处理器功能扩展到主机控制器，特别是允许 90-30 系列控制器通过 PCM 执行的非本地 r 第三方应用程序。这种应用程序包括基本编程语言（BAS），用于开发用于实现监督控制和数据采集（SCADA）系统的自定义可执行文件。除此之外，该IC693PCM301还支持编程终端、CRT、条形码阅读器、秤、打印机、ASCII 设备、远程终端单元 （RTU） 主设备之间的数据交换。

IC693PCM301仅安装在 CPU 底板上，但保留给 CPU 的插槽除外，即 CPU/1。此外，该模块不兼容安装在扩展或远程机架中，也不适用于 CPU 311、313 和 323 等嵌入式 CPU 型号。该模块带有指示灯，特别是模块正常指示灯、US1 和 US2 LED 指示灯，用于指示内部安装的两 （2） 个串行端口的运行情况。该模块还配有一个重启按钮，用于初始化模块，而无需重启整个机架或使用软件。

IC693PCM301内置 192 KB 的总内存，其中 47KB 分配给 Megabasic 内存。

GE Fanuc 高性能 IC693PCM301 可编程协处理器模块 （PCM） 的设计和制造旨在为 GE Fanuc 90-30 系列可编程逻辑控制器或 PLC 提供额外的处理能力。PCM 为单个模块，可插入 90-30 系列 PLC 底板中可用的任何插槽中，但第一个插槽除外，该插槽只能由整个 PLC 系统的电源占用。一旦PLC收到IC693PCM301可编程协处理器模块或PCM的添加，它将能够与外围设备进行通信，例如串行编程终端、带有串行通信端口的计算机显示器、条形码阅读器、个人计算机、电子秤、串行打印机、ASCII设备，甚至与配置为充当主设备的远程终端单元进行通信。

☆型号：IC693PCM301 可编程协处理器模块 主机控制器

【英文介绍】

The IC693PCM301 is a programmable coprocessor module (PCM) designed to be compatible with the 90-30 series Programmable Logic Controller (PLC) product family, which was previously manufactured by GE Fanuc Automation Bus and was recently acquired by Emerson Automation. The PCM module supports Modbus and GE Fanuc's CCM protocol through an integrated single 25-pin port, which is essentially a two (2) port interface.

The IC693PCM301 supports the extension of processor capabilities to host controllers, especially non-native r third-party applications that allow 90-30 series controllers to execute via PCM. This application includes a basic programming language (BAS) for developing custom executables for implementing supervisory control and Data acquisition (SCADA) systems. In addition, the IC693PCM301 supports data exchange between programming terminals, CRTS, barcode readers, scales, printers, ASCII devices, and Remote Terminal Unit (RTU) master devices.

The IC693PCM301 is installed only on the CPU mainboard, except for the slot reserved for the CPU, i.e. CPU/1. In addition, the module is not compatible for installation in extension or remote racks, nor for embedded CPU models such as CPU 311, 313, and 323. The module is equipped with indicators, in particular the module normal indicator, US1 and US2 LED indicators, to indicate the operation of the two (2) serial ports installed internally. The module also comes with a restart button for initializing the module without having to restart the entire rack or use software.

The IC693PCM301 has a total memory of 192 KB, of which 47KB is allocated to the Megabasic memory.

The GE Fanuc high performance IC693PCM301 Programmable Coprocessor module (PCM) is designed and manufactured to provide additional processing power to the GE Fanuc 90-30 series programmable logic controllers or PLCS. The PCM is a single module that can be inserted into any slot available in the 90-30 series PLC backboard, except for the first slot, which can only be occupied by the power supply of the entire PLC system. Once the PLC receives the addition of the IC693PCM301 programmable coprocessor module or PCM, it will be able to communicate with peripheral devices, such as serial programming terminals, computer monitors with serial communication ports, bar code readers, personal computers, electronic scales, serial printers, ASCII devices, etc. It even communicates with remote terminal units configured to act as master devices.

☆型号：IC693PCM301 可编程协处理器模块 主机控制器

【其他型号推荐】