990-05-50-01-00 振动变送器 其机械控制系统的输入

☆型号：990-05-50-01-00 振动变送器 其机械控制系统的输入

【产品详情】

990-05-50-01-00振动变送器是一种由Bently Nevada公司生产的设备，主要用于将机械振动转换为标准的电信号进行传输。这种变送器通常被应用于离心空气压缩机或小型泵、电动机或风扇等设备的监测和控制系统中。

作为一种2线、回路供电的设备，990振动变送器可以接受来自Bently Nevada的3300 NSv接近探头和匹配的延长电缆的输入，将信号调节为适当的峰峰值振动幅度工程单位，并提供4至20 mA的比例振动信号输出，以作为其机械控制系统的输入。

此外，990-05-50-01-00振动变送器具有高精度、高稳定性和可靠性等特点，能够有效地监测机械设备的振动状态，及时发现和解决潜在的故障问题，保证设备的正常运行和生产安全。

需要注意的是，使用990-05-50-01-00振动变送器时，应严格按照产品说明书和操作规程进行安装、调试和维护，以确保其正常工作和准确测量。同时，还应注意定期对设备进行校准和检查，以保持其测量精度和稳定性。

☆型号：990-05-50-01-00 振动变送器 其机械控制系统的输入

【英文介绍】

The 990-05-500-01-00 Vibration transmitter is a device manufactured by Bently Nevada that converts mechanical vibrations into standard electrical signals for transmission. Such transmitters are commonly used in monitoring and control systems for centrifugal air compressors or small pumps, motors or fans.

As a 2-wire, loop-powered device, the 990 vibration transmitter can accept input from Bently Nevada's 3300 NSv proximity probe and matching extension cable, adjust the signal to the appropriate peep-to-peak vibration amplitude engineering unit, and provide a proportional vibration signal output of 4 to 20 mA. As input to its mechanical control system.

In addition, the 990-05-500-01-00 vibration transmitter has the characteristics of high precision, high stability and reliability, which can effectively monitor the vibration state of mechanical equipment, discover and solve potential fault problems in time, and ensure the normal operation and production safety of the equipment.

It should be noted that when using the 990-05-500-01-00 vibration transmitter, installation, commissioning and maintenance should be carried out in strict accordance with the product instructions and operating procedures to ensure its normal operation and accurate measurement. At the same time, attention should also be paid to regularly calibrate and check the equipment to maintain its measurement accuracy and stability.

☆型号：990-05-50-01-00 振动变送器 其机械控制系统的输入

【其他型号推荐】