1900/65A 通用设备监视器 旨在持续监测和保护设备
【产品详情】
描述
1900/65A通用设备监视器是
旨在持续监测和保护设备
用于各种应用和行业。的
Monitor的低成本使其成为一般用途机器和过程的理想解决方案,可以从中受益
持续监控和保护。
输入
1900/65A提供4个传感器输入和4个
温度输入。软件可以配置每个传感器
输入支持2线和3线加速度计,速度
传感器或接近传感器。每个温度输入支持
E型,J型,K型和T型热电偶,以及2线或3线rtd。
输出
1900/65A提供6个继电器输出,4个4-20 mA
记录仪输出,以及专用缓冲输出。用户
可以用1900组态软件配置继电器吗
根据OK, Alert和
任何航道或航道组合的危险状况;
并提供来自任何渠道的任何变量的数据
记录器输出。专用缓冲区输出可以提供
每个换能器输入信号。
Modbus网关选项允许监视器提供
静态变量,状态,事件列表,时间和日期信息
直接到任何Modbus客户端,包括分布式控制
系统(dcs),监控和数据采集
(SCADA)系统,可编程逻辑控制器(plc),或
系统1软件。监视器使用一个内部计数器和一个
Modbus客户端/主端时间参考生成时间和
日期信息。用户可以升级监视器而不需要
Modbus网关通过订购1900/01进行通信
升级(请参阅订购信息部分)。的1900/65A
1900/65A通用设备监视器
数据表
本特利内华达机械状态监测
支持通过以太网进行Modbus通信
和一个软件可配置的RS232/485串行端口
1900/65A 通用设备监视器 旨在持续监测和保护设备
【英文介绍】
Description
The 1900/65A General Purpose Equipment Monitor is
designed to continuously monitor and protect equipment that
is used in a variety of applications and industries. The
monitor’s low cost makes it an ideal solution for generalpurpose machines and processes that can benefit from
continuous monitoring and protection.
Inputs
The 1900/65A provides four transducer inputs and four
temperature inputs. Software can configure each transducer
input to support 2- and 3-wire accelerometers, velocity
sensors or proximity sensors. Each temperature input supports
Type E, J, K, and T thermocouples, and 2- or 3-wire RTDs.
Outputs
The 1900/65A provides six relay outputs, four 4-20 mA
recorder outputs, and a dedicated buffered output. The user
can use the 1900 Configuration software to configure the relay
contacts to open or close according to the OK, Alert and
Danger statuses of any channel or combination of channels,
and to provide data from any variable from any channel on any
recorder output. The dedicated buffer output can provide the
signal for each transducer input.
A Modbus Gateway option allows the monitor to provide
static variables, statuses, event list, time and date information
directly to any Modbus client, including Distributed Control
Systems (DCSs), Supervisory Control and Data Acquisition
(SCADA) systems, Programmable Logic Controllers (PLCs), or
System 1 software. The monitor uses an internal counter and a
Modbus client/master time reference to generate time and
date information. Users can upgrade monitors without the
Modbus Gateway by ordering the 1900/01 Communications
Upgrade (see the Ordering Information section). The 1900/65A
1900/65A General Purpose Equipment Monitor
Datasheet
Bently Nevada Machinery Condition Monitoring
supports Modbus communications via Ethernet
and a software-configurable RS232/485 serialport
1900/65A 通用设备监视器 旨在持续监测和保护设备
【其他型号推荐】
3500/05-02-02 Bently Nevada | 张力控制放大器 | Bently Nevada | 3500/34 TMR 继电器模块 |
3500/45 Bently Nevada | 开关量输出子模件 | Bently Nevada | 3500/44M 空气动力监测器 |
3500/32 Bently Nevada | DCS系统备件 | Bently Nevada | 3500 电绝缘装置接口 |
3500/53M Bently Nevada | 脉冲输入子模件 | Bently Nevada | 3500/93 LCD 显示装置 |
3500/42M Bently Nevada | 控制IO子模件 | Bently Nevada | 3500/94 VGA 显示装置 |
3500/93 Bently Nevada | 模拟量模块 | Bently Nevada | 3500/95 用户接口工作站 |
3500/20 Bently Nevada | 数字输出板 | Bently Nevada | 3500/15(前面板127610-01,后背板125840-01 ) |
3500/25 Bently Nevada | 框架 | Bently Nevada | 3500/15-02-02-00,上部槽口&下部槽口都装,故为双电源, |
330180-X1-05 BENTLY | 通讯板 | Bently Nevada | 3500/15-02-00-00,上部槽口装,下部槽口不装,故为单电源 |
330130-085-00-05 BENTLY | 串口测量板 | Bently Nevada | 3500/15-05-05-00,上部槽口&下部槽口都装,故为双电源 |
330130-040-00-00 BENTLY | DCS卡件模块 | Bently Nevada | bently 3500本特利继电器模块 |
330101-00-25-10-02-00 BENTLY | 伺服模块 | Bently Nevada | 3500/32四通道继电器模块 |
BENTLY 3500/32 | 机器人轴计算板 | Bently Nevada | 3500/32-01-00 |
BENTLY 3500/33 大卡 | 连接端子单元 | Bently Nevada | 125712-01四通道继电器模块备件 |
BENTLY 1900/55 | 机器人网络通讯卡 | Bently Nevada | 125720-01 四通道继电器后背板I/O 模块备件 |
BENTLY 3500/33 大卡 | 模拟输出电路板 | Bently Nevada | 3500/33 继电器16通道模块 |
BENTLY 149992-01 后卡 | 火焰分析仪 | Bently Nevada | 3500/33-01-00 |
BENTLY 3500/60 | 模拟量输入模块 | Bently Nevada | 149986-01 前板16通道继电器控制模块 |
BENTLY 125768-01 3500/20小卡 | 电压测量仪表 | Bently Nevada | 149992-01后背板16通道继电器输出模块 |
BENTLY 3500/20 | 网络接口模组 | Bently Nevada | 本特利继电器模块必须有本特利框架3500/05,电源3500/15,组态软件3500/01 |