3500/62   机械状态监测  过程变量监视器

【产品详情】

机械状态监测

3500/62过程变量监视器是一个6通道监视器

用于加工机床的关键参数说明

持续监测，如压力、流量、

温度和水平。显示器接受+4至+20 mA

电流输入或-10之间的任何比例电压输入

Vdc和+ 10vdc。它约束这些信号并进行比较

条件信号到用户可编程报警定位点。

3500/62显示器:

l连续比较监控参数

根据配置的警报设定值来驱动警报机械保护。

l提供两者的基本机器信息操作维护人员。

您可以使用3500机架编程3500/62

组态软件执行电流或电压

测量。3500/62提供三个I/O模块

信号输入场景:直流+/- 10v，隔离4ma ~ 20ma，或4- 10ma

20ma具有本质安全齐纳屏障。内部屏障

I/O提供外部电源输入端子提供

4-20毫安换能器的本质安全电源

当用于三模冗余(TMR)时

配置时，必须安装过程变量监视器

三个一组彼此相邻的。在这里使用时

配置时，监视器采用两种类型的投票方式

确保操作准确，避免机器损坏单点故障保护。

3500/62   机械状态监测  过程变量监视器

【英文介绍】

Machinery Condition Monitoring

The 3500/62 Process Variable Monitor is a 6-channel monitor

for processing machine critical parameters that merit

continuous monitoring, such as pressures, flows,

temperatures, and levels.   The monitor accepts +4 to +20 mA

current inputs or any proportional voltage inputs between -10

Vdc and +10 Vdc.   It conditions these signals and compares

the conditioned signals to user-programmable alarm

setpoints.

The 3500/62 monitor:

l Continuously compares monitored parameters

against configured alarm setpoints to drive alarms for

machinery protection.

l Provides essential machine information for both

operations and maintenance personnel.

You can program the 3500/62 using the 3500 Rack

Configuration Software to perform either current or voltage

measurements.  The 3500/62 offers I/O modules for three

signal input scenarios: +/-10 Volts DC, isolated 4-20 mA, or 4-

20 mA with Intrinsically Safe zener barriers.  The Internal Barrier

I/O provides external power input terminals to provide

intrinsically safe power to the 4-20 mA transducers

When used in a Triple Modular Redundant (TMR)

configuration, you must install Process Variable Monitors

adjacent to each other in groups of three.  When used in this

configuration, the monitor employs two types of voting to

ensure accurate operation and to avoid loss of machinery

protection due to single-point failures.

3500/62   机械状态监测  过程变量监视器

【其他型号推荐】