BENTLY 3500/15 127610-01 电源模块

BENTLY 3500/15 127610-01  电源模块

BENTLY 3500/15 127610-01  电源模块

部件号：3500/15 127610-01 制造商：GE/本特利 系列： 本特利 3500/15 电源 完整描述：GE/Bently Nevada 3500/15 127610-01 交流电源模块 描述 3500/15 电源是半高模块，必须 安装在机架左侧的指定插槽中。3500 机架可以包含一个或两个电源与任何 交流和直流的组合。任一电源都可以为全机架供电。 3500/15 电源接受范围广泛的输入 电压并将其转换为可接受的电压以供使用 其他 3500 个模块。以下电源可用 使用 3500 系列机械保护系统： 1) 传统交流电源 2) 通用交流电源 3) 高压直流电源 4) 低压直流电源 -22 至 150°F（-30 至 65°C）工作温度 95%，非冷凝，湿度范围 LED指示灯 47 至 63 赫兹输入频率 Bently 3500/15 电源是半高模块，必须安装在机架左侧的指定插槽中。3500 机架可以包含一个或两个具有任意交流和直流组合的电源。任一电源都可以为整个机架供电。 当两个电源安装在机架中时，下方插槽中的一个作为主电源，上方插槽中的另一个作为备用电源。如果已安装，第二个电源是主电源的备用电源。只要安装了第二个电源，卸下或插入任一电源模块都不会中断机架的运行。 3500/15 电源可接受各种输入电压，并将其转换为其他 3500 模块可接受的电压

BENTLY 3500/15 127610-01  电源模块

Part Number: 3500/15 127610-01 Manufacturer: GE/ Bentley Series: Bentley 3500/15 Power Supply Complete Description: GE/Bently Nevada 3500/15 127610-01 AC Power module Description The 3500/15 AC power module is a half-height module and must be installed in the specified slot on the left side of the rack. 3500 racks can contain one or two power supplies with any combination of AC and DC. Any power supply can power the whole rack. The 3500/15 power supply accepts a wide range of input voltages and converts them to acceptable voltages for use with the other 3,500 modules. The following power supplies can be used with the 3500 Series mechanical protection system: 1) Conventional AC power supply 2) General purpose AC power supply 3) High voltage DC power supply 4) Low voltage DC power supply -22 to 150°F (-30 to 65°C) Operating temperature 95%, non-condensing, Humidity range LED Indicator 47 to 63 Hz Input frequency Bently 3500/15 The power supply is a half-height module that must be installed in a designated slot on the left side of the rack. The 3500 rack can contain one or two power supplies with any combination of AC and DC. Either power supply can power the entire rack. When two power supplies are installed in the rack, one in the lower slot acts as the primary power supply and the other in the upper slot acts as the standby power supply. If installed, the second power supply is a backup to the main power supply. As long as a second power supply is installed, removing or inserting either power module will not interrupt the operation of the rack. The 3500/15 power supply accepts a variety of input voltages and converts them to voltages acceptable to other 3500 modules

BENTLY 3500/15 127610-01  电源模块