BENTLY 3500/32 125712-01 继电器模块

BENTLY  3500/32 125712-01  继电器模块

BENTLY  3500/32 125712-01  继电器模块

BENTLY 3500/32 125712-01上支持高分辨率数字图形和多媒体质量视频使用855GME（GMCH）芯片组内部图形的VMIVME-7807/VME-7807RC控制器。屏幕分辨率高达1600 x 1200 x 256色（单视图模式）由图形适配器支持。

BENTLY 125720-01 GE Fanuc嵌入式系统公司的VMIVME-7807/VME-7807RC附加功能超出典型桌面计算机系统的功能。这些装置提供：四个软件控制的通用定时器以及一个可编程定时器用于同步和控制嵌入式系统中多个事件的看门狗定时器应用。VMIVME-7807/VME-7807RC还提供可引导的CompactFlash磁盘系统和32KB非易失性RAM。此外，VMIVME-7807/VME-7807RC支持嵌入式智能VME桥接器，以实现兼容性具有最苛刻的VME应用。这些特点使该装置非常适合于：嵌入式应用程序，特别是标准硬盘和软盘无法使用驱动器。

TDI 位于 3500 机架电源附近的插槽中。它与 M 系列监视器（3500/40M、 3500/42M等）连续收集稳态和瞬态动态（波形）数据，并将这些数据通过 到主机软件的以太网链路。有关详细信息，请参阅本文档末尾的兼容性部分 信息。

静态数据捕获功能是 TDI 的标准配置。但是，使用可选的通道启用磁盘将允许 TDI 还用于捕获动态和高分辨率瞬态数据。TDI 集成了通信处理器 在3500机架内工作正常。

尽管 TDI 提供了整个机架通用的某些功能，但它不是关键监控路径的一部分，并且 对整个监控系统的正常、正常运行没有影响，用于自动机械保护。每 3500 机架需要一个 TDI 或 RIM，它始终占用插槽 1（电源旁边）。

BENTLY  3500/32 125712-01  继电器模块

The BENTLY 3500/32 125712-01 supports high resolution digital graphics and multimedia quality video on the VMIVME-7807/VME-7807RC controller using 855GME (GMCH) chipset internal graphics. Screen resolution up to 1600 x 1200 x 256 colors (single view mode) supported by a graphics adapter.

BENTLY 125720-01 GE Fanuc Embedded Systems' VMIVME-7807/VME-7807RC has additional features that go beyond those of a typical desktop computer system. These devices provide: four software-controlled general-purpose timers and a programmable timer for synchronizing and controlling multiple events in an embedded system watchdog timer application. The VMIVME-7807/VME-7807RC also offers a bootable CompactFlash disk system and 32KB of non-volatile RAM. In addition, the VMIVME-7807/VME-7807RC supports embedded intelligent VME Bridges to achieve compatibility with the most demanding VME applications. These features make the device ideal for: embedded applications, especially standard hard disks and floppy disks where the drive is not available.

The TDI is located in a slot near the power supply in the rack 3500. It continuously collects steady-state and transient dynamic (waveform) data with M-series monitors (3500/40M, 3500/42M, etc.) and passes this data through an Ethernet link to the host software. For more information, see the Compatibility section at the end of this document.

Static data capture is standard in TDI. However, using an optional channel-enabled disk will allow TDI to also be used to capture dynamic and high-resolution transient data. The TDI integrated communication processor works well in 3500 racks.

Although TDI provides certain functions common to the entire rack, it is not part of the critical monitoring path and has no impact on the normal, normal operation of the entire monitoring system for automatic mechanical protection. Every 3500 racks requires a TDI or RIM, which always occupies slot 1 (next to the power supply).

BENTLY  3500/32 125712-01  继电器模块