9200-01-02-10-00 振动速度传感器 两线制速度地震探头传感器

☆型号：9200-01-02-10-00 振动速度传感器 两线制速度地震探头传感器

【产品详情】

9200-01-01-10-00振动速度传感器为美国本特利内华达Bently Nevada振动监测产品，是两线结构，采用动线圈技术，提供直接正比于传感器振动速度的电压输出。动圈式传感器对冲击或脉冲激励不太敏感，在某些应用中是一个很好的选择。此外，由于它们不需要外部电源，因此便于便携式测量应用。9200-01-01-10-00是两线传感器，适用于连续监测或与测试或故障诊断仪表一起应用于周期性测量中.测量轴承箱、机壳或结构的振动。该两线系统由9200传感器、84661或9571电缆和可选的振动监测器器（1900/65、2300/20、3500/42）组成。

本特利9200-01-01-10-00速度传感器安装角/ 小工作频率0±2.5,4.5Hz(270 cpm)，顶部为航空插头连接，M10X1双头螺栓安装。灵敏度为20 mV/mm/s (500 mV/in/s) ±5%， 频率响应:4.5Hz(270 cpm)到1kHz(60,000 cpm)。外壳和适配器材料：阳极氧化铝A204.

☆型号：9200-01-02-10-00 振动速度传感器 两线制速度地震探头传感器

【英文介绍】

The 9200-01-01-10-00 vibration speed sensor is a vibration monitoring product from Bently Nevada, Bentley, USA. It is a two-wire structure and uses moving coil technology to provide voltage output directly proportional to the vibration speed of the sensor. Moving-coil sensors are less sensitive to shock or pulse excitation and are a good choice in some applications. In addition, since they do not require an external power source, they are convenient for portable measurement applications. The 9200-01-01-10-00 is a two-wire sensor suitable for continuous monitoring or for use in periodic measurements with test or fault diagnosis instruments. Measure the vibration of the bearing box, housing or structure. The two-wire system consists of a 9200 sensor, 84661 or 9571 cable, and optional vibration monitors (1900/65, 2300/20, 3500/42).

Bentley 9200-01-01-10-00 Speed sensor Mounting Angle/small operating frequency 0±2.5,4.5Hz(270 cpm), top aviation plug connection, M10X1 stud mounting. Sensitivity is 20 mV/mm/s (500 mV/in/s) ±5%, frequency response :4.5Hz(270 cpm) to 1kHz(60,000 cpm). Housing and adapter material: anodized aluminum A204.

☆型号：9200-01-02-10-00 振动速度传感器 两线制速度地震探头传感器

【其他型号推荐】