128085-01 直流电源模块 为整个机架供电

☆型号：128085-01 直流电源模块 为整个机架供电

【产品详情】

3500/15交流电源模块和直流电源模块为半高模块必须安装在机架左侧的指定槽位上。的3500机架可以包含一个或两个电源的任何组合交流和直流。任何一种电源都可以为整个机架供电。当机架内安装两个电源时，下方的电源插槽充当主电源，而另一个在上插槽充当备份供应。如果安装，第二个电源是备份主要的一个。

拔插任何一个电源模块都不停机机架只要安装第二电源即可正常运行。3500/15交流和直流电源接受广泛的输入电压，并将其转换为可接受的电压，以供他人使用3500模块。3500配套的电源有以下几种

系列机械保护系统:

l通用交流电源

l高压直流电源

l低压直流电源

☆型号：128085-01 直流电源模块 为整个机架供电

【英文介绍】

3500/15 AC power module and DC power module are half-height modules. The modules must be installed in the specified slot on the left of the rack. The 3500 rack can contain any combination of one or two power supplies AC and DC. Any kind of power supply can power the entire rack. When two power supplies are installed in the rack, the lower power socket acts as the primary power supply, while the other one in the upper slot acts as a backup supply. If installed, the second power supply is the backup primary one.

Remove and insert any power module without stopping the rack as long as the second power supply can be installed to run normally. 3500/15 AC and DC power supplies accept a wide range of input voltages and convert them to acceptable voltages for use by others. There are the following power supplies for the 3500

Series mechanical protection system:

l Universal AC power supply

l High voltage DC power supply

l Low voltage DC power supply

☆型号：128085-01 直流电源模块 为整个机架供电

【其他型号推荐】